Current position > Product detail
『Microlife Peak Flow Meter: Mechanical Home Asthma Monitoring Devices』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Microlife Peak Flow Meter: Mechanical Home Asthma Monitoring Devices
Quick Answer
The Microlife Peak Flow Meter is a mechanical device for home asthma monitoring. It measures peak expiratory flow in liters per minute and it needs no battery. Silver Automation Instruments does not sell this home medical unit, but we explain the key points below and show how industrial flow meters compare for process use.
What This Device Measures
A peak flow meter shows how fast a patient can push air out of the lungs. The Microlife unit displays the result in liters per minute. Most adult mechanical models cover a range of 60 to 800 liters per minute. Many asthma action plans use three zones based on personal best readings. A patient checks the number every morning and evening. A drop below 80 percent of personal best may signal a yellow zone. A drop below 60 percent may signal a red zone. These zone limits come from common asthma guidelines and not from this page. Patients should follow the plan from their own doctor.
How the Mechanical Design Works
The Microlife meter uses a piston and a spring. The patient blows hard into a mouthpiece. The air pushes the piston along a numbered scale. The marker stays at the highest reading. No battery is needed. The mechanical design works in humid rooms and during travel. In practice, the piston slides back when the user moves the reset button. Most engineers skip this part because the design is simple enough for a child to use under supervision. The body of the device is usually made from ABS plastic or polycarbonate. It can be cleaned with mild soap and warm water. The mouthpiece should be kept dry before storage.
How to Clean and Store the Device
Remove the mouthpiece and wash it with warm water and mild soap. Dry all parts before reassembly. Do not use hot water over 70 °C because the plastic may soften. Store the meter in a dry place away from direct sunlight. Do not share a mouthpiece without disinfection. Replace the meter if the piston travel becomes sticky or the scale fades. These care steps come from general practice and the model manual should be followed.
Who Uses This Peak Flow Meter
Asthma patients use this device at home. Parents use it for children above five years old when the child can blow hard enough for a valid reading. Nurses use it in clinics to show correct blowing technique. A clinic in Manila tested three mechanical peak flow meters last year. The nurses preferred the Microlife device because the scale markings were easy to read under fluorescent clinic light. A customer in Ho Chi Minh City also asked us about this product for a hospital tender. We directed that inquiry to a medical device distributor because Silver Automation Instruments focuses on industrial flow meters.
Key Specifications
Typical Microlife mechanical peak flow meters are CE marked. Most adult models cover 60 to 800 liters per minute. Some pediatric models start at 50 liters per minute. Accuracy is often within plus or minus 10 liters per minute or 10 percent of reading depending on the manual. The scale is marked in increments of 10 liters per minute. The unit has no transmitter, no digital output, and no battery. This is a single point device for home use, not a process instrument.
Common Mistakes in Home Peak Flow Monitoring
A weak seal around the mouthpiece causes low readings. A patient should stand up and blow hard for one or two seconds. Do not block the vent holes. Do not cough into the device. In practice, the first blow of three is often low because the patient warms up. Many clinicians ask for three blows a
Where Peak Flow Monitoring Fits in Asthma Care
A doctor may include peak flow readings in a written asthma action plan. The patient records morning and evening values. The trend over days or weeks matters more than one reading. A single low value may happen because of poor blowing effort. A repeated drop from the personal best gives an early warning before symptoms get worse. The Microlife meter provides one data point. It does not replace a spirometry test, a doctor visit, or an emergency plan.
Differences From Industrial Flow Meters
Home peak flow meters measure a short burst of exhaled air. Industrial flow meters measure continuous or batch flow in closed pipes. Silver Automation Instruments supplies Coriolis mass flow meters, electromagnetic flow meters, ultrasonic flow meters, vortex flow meters, oval gear flow meters, and thermal mass flow meters. These devices handle process conditions such as 4 to 20 mA HART output, ATEX Zone 1, DN15 pipe size, and fluid temperatures from minus 40 °C to 200 °C depending on the model. The Microlife unit has no signal output and no process connection. The industrial unit handles continuous process measurement.
Why This Guide Matters for Industrial Buyers
Here is the thing: many buyers in Southeast Asia, Oceania, Latin America, Africa, and the Middle East search for flow meter devices across both medical and industrial categories. We wrote this page to answer the Microlife query and to connect with engineers who may also need industrial process instruments. Silver Automation Instruments works with water and wastewater plants, oil and gas terminals, chemical processors, food and beverage factories, and marine operators. Most of our customers are small and medium enterprises from 10 to 100 people. They need a supplier that responds fast and gives a clear price without a long chain of intermediaries.
Contact Silver Automation Instruments
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. We will recommend a flow meter model and quote. Tel: +86-25-68650347. Whatsapp: +86-25-52155837. WeChat: +86 15365082610. Our team at Silver Automation Instruments covers electromagnetic flow meters for water and wastewater, Coriolis mass flow meters for oil and gas, oval gear flow meters for diesel and fuel oil, and ultrasonic flow meters for large pipe applications.
FAQ
Does Silver Automation Instruments sell the Microlife Peak Flow Meter?
No. We do not sell home medical devices. We explain this product because many users search the term. For industrial pipe flow, we supply process flow meters.
How often should a patient use a mechanical peak flow meter?
Patients follow their own asthma action plan. Many plans require morning and evening readings. Others use it only during symptoms or after medication changes.
Can the Microlife peak flow meter replace a spirometry test?
No. Peak flow measures one parameter: how fast air exits the lungs. Spirometry gives more lung function data. A doctor or respiratory therapist should interpret both.
What is the typical measuring range?
Most adult Microlife mechanical units cover 60 to 800 liters per minute. Pediatric models may start at 50 liters per minute. Check the model manual for exact values.
What industrial flow meter should a 50 mm water line use?
For water and wastewater, an electromagnetic flow meter is a common choice. Send us pressure (bar), temperature (°C), pipe size (DN), and flow range. We will reply with a quote.