What scenarios are butane flow meters and electromagnetic flow meters suitable for?

『Butane flowmeter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)

1. Introduction to Gas Flow Meter

Gas flow meter is an instrument for measuring gas flow rate. Install in the pipeline to record the amount of gas flowing through. Can measure blast furnace gas flow meter, coke oven gas mass flow meter, gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, nitrogen, liquefied petroleum gas, hydrogen peroxide, flue gas inspection, methane, butane, chlorine, gas, biogas, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia,

2. What scenarios are electromagnetic flow meters suitable for?

1. To ensure the necessary conditions for electromagnetic flowmeter measurement, we first need to create an operating environment for the electromagnetic flowmeter: (1) The measured fluid medium must have conductivity and fill the pipeline. (2) The flowmeter measurement system must be well grounded. (3) The straight pipe sections before and after the flowmeter meet the specified technical requirements. (4) Avoid strong electromagnetic field interference near the flowmeter. (5) It should be installed in a dry and ventilated place as much as possible, avoiding direct sunlight and rain. The ambient temperature should be between -20 ° C and+60 ° C, and the relative humidity should be less than 85%. It should be avoided to install in environments with strong corrosive gases. (6) There should be sufficient space around the installation of the flowmeter for easy installation and maintenance. A place with no vibration or low vibration amplitude should be selected. If the vibration is too large, fixed supports should be added to the pipeline before and after the sensor. (7) Choose a location where there will be no negat

ive pressure inside the measuring tube. If there is a certain amount of turbulence and eddies in the pipeline that are generated in the non measuring area (such as bends, tangential flow restrictions, or semi open check valves upstream), it is not related to the width measurement. 2. The use conditions of electromagnetic flow meters. Electromagnetic flow meters have high standards for the cleanliness and tidiness of fluids, and filters must be installed in front of the flow meter to ensure the cleanliness and tidiness of the fluid. The filter can be funnel-shaped, and its cleanliness and tidiness can be measured by the change in differential pressure at both ends. Electromagnetic flowmeter is a speed type instrument with advantages such as high accuracy, good repeatability, and easy installation and use. Suitable for clean or basically clean pipelines in industries such as petroleum, chemical, urban gas, metallurgy, mining, etc., with relatively constant gas pressure and single-phase gases such as natural gas, propane, butane, ethylene, nitrogen, air, etc. Electromagnetic flow meters are widely used in industrial fields such as chemical fiber, food, papermaking, sugar production, mining and metallurgy, water supply and drainage, environmental protection, steel, petroleum, landscaping, agricultural irrigation, pharmaceuticals, etc. For more detailed information, please feel free to consult Mike Sensor Co., Ltd!

3. Technical parameters of gas flowmeter

Technical parameters of gas flowmeter are as follows

1. Measurement range: Under standard conditions (20 ℃, 101.33KPa), the measurable gas flow range is (0.05-80) Nm/s

2. Applicable medium: Suitable for measuring most clean gases except acetylene g

What scenarios are butane flow meters and electromagnetic flow meters suitable for?

1. Introduction to Gas Flow Meter

2. What scenarios are electromagnetic flow meters suitable for?

3. Technical parameters of gas flowmeter

『SILVER Official Website SERVICE』